<label id="g9vf4"><track id="g9vf4"></track></label>
  • <tbody id="g9vf4"></tbody>
  • <th id="g9vf4"></th>
    <li id="g9vf4"></li>

      1. 中科聚峰礦井車設備

        • 服務熱線:


        當前位置:首頁 > 新聞中心 > 客戶反饋 >





        來源:http://www.socialsecurityutah.com/ 發布時間:2022-06-11 瀏覽次數:200

        As an indispensable member of the underground operation, the underground loader plays an irreplaceable role. The performance of the loader will directly affect the quality and efficiency of the expired work. In the main operating system of the underground loader, the performance of the transmission in the hydraulic and hydraulic systems will also affect the construction progress and quality of the project. Therefore, it is the work of modern engineering technicians to understand and master its use and maintenance knowledge and troubleshooting technology. For the maintenance method of torque converter of underground loader, we summarize the following points for you:
        1. after the end of each shift, check the fastening of the parts related to the gearbox of the underground loader in time. If they are loose, tighten them in time.
        2. after every 100 hours of operation, unscrew the oil filler nut on the torque converter cover, and check the oil level with the oil level gauge. The oil level should be between the upper and lower scribes of the oil level gauge. The tractor should be in a horizontal position when measuring. If the oil quantity is insufficient, it should be added in time.
        3. if the lubricating oil of the underground loader is gear oil, pay attention to keep the gear oil clean. There should be no mechanical impurities in the oil, otherwise the wear of the gear will be accelerated. When refuelling, pay attention to the cleanliness of the refuelling tool and the position of the refuelling port.
        4. the gearbox should be cleaned and the gear oil should be replaced in time every 500 hours or so. The cleaning method is as follows: after the work of the underground loader is completed, the dirty oil shall be discharged while it is hot, and then an appropriate amount of clean diesel oil shall be added. After the tractor moves forward and backward several times, the diesel oil shall be discharged, and then the clean gear oil shall be added. Note that gear oil of different specifications should be selected in different seasons. Gear oil of winter should be used in winter and gear oil of summer should be used in summer.
        In addition, the seals and intactness of oil seals and linerboard shall be checked regularly, and they shall be replaced in time if necessary. During replacement, the thickness of the liner board should be the same as the original thickness to ensure the correct axial clearance and ensure the normal operation of the underground loader.
        The above is the mine loader introduced to you http://www.socialsecurityutah.com I hope that the detailed introduction to the will be helpful to you If you have any questions, please contact us We will provide you with professional service
        <label id="g9vf4"><track id="g9vf4"></track></label>
      2. <tbody id="g9vf4"></tbody>
      3. <th id="g9vf4"></th>
        <li id="g9vf4"></li>