Mine loader is also known as small loader, underground loader, mining scraper, mining forklift, small forklift roadway loader is a relatively common engineering machinery and equipment. Workers can use the scraper to complete the loading work well, especially suitable for industrial and mining enterprises such as coal mines, iron mines, lead and zinc mines, nonferrous metal mines, etc.

1.礦用裝載機采用鉸接式構造，轉彎半徑小，轉向靈敏；

1. The mine loader adopts articulated structure, with small turning radius and sensitive turning;

2.采用雙泵分流系統，節能降耗，作業效率高。整機動力強勁，掘起力大；

2. The dual pump shunt system is adopted, which saves energy, reduces consumption and has high operation efficiency. The whole machine has strong power and strong digging force;

3.標配礦山鏟斗作業效率高。整機高度，合適井下，隧道，礦洞作業。

3. The standard mine bucket has high operation efficiency. The height of the whole machine is suitable for underground, tunnel and mine operation.

4.全系裝水過濾，尾氣凈化安裝，可選裝上下可調護頂架。

4. The whole system is installed with water filtration and tail gas purification, and the top frame can be adjusted up and down.

5.礦用裝載機主要適用于煤礦 鐵礦 鉛礦等礦山裝載機。

5. Mine loaders are mainly applicable to mine loaders such as coal mines, iron mines, lead mines, etc.

井下裝載機的動力系統交融國內技術，整機動力強勁，經過尾氣處置安裝有效降低尾氣中的碳氧化合物及氮氧化合物含量，確保井下作業平安，機器傳動系統采用濕式驅動橋，雙管路制動系統，順應井下濕潤環境，確保制動牢靠性，而大擺動角度的擺動架，順應路面平穩不平的工況，增加機器的穩定性和平安性，駕駛室采用四柱支撐、頂棚采用雙層構造，能更好地維護機手的生命平安。

The power system of the underground loader integrates domestic technology, and the power of the whole machine is strong. After the tail gas treatment and installation, the content of carbon oxide and nitrogen oxide in the tail gas is effectively reduced to ensure the safety of underground operation. The machine transmission system adopts wet drive axle and double pipe braking system, which conforms to the wet environment underground and ensures the reliability of braking. The swing frame with large swing angle conforms to the working condition of smooth and uneven road surface, To increase the stability and safety of the machine, the cab adopts four column support and the ceiling adopts double-layer structure, which can better maintain the life safety of the manipulator.

礦用裝載機作業時，操作工作先導閥直到動臂降下，然后使鏟斗尖落地，以遲緩的低速接近料堆，要使裝載機成一條直線地行進鏟裝，若前后車輪不成直線，不但會使推進力減少，而且會把 鏟運機因成“”狀而損壞。鏟裝時，應先把裝載區內的零星巖石肅清以瓶少碰撞車底和損壞輪胎現象。鏟運機的鏟裝過程是應用機器行走的插入力和舉升鏟斗的鏟取力兩者的合力從礦石堆中鏟取礦石的過程。在鏟裝過程中，不是把控制閥踏板“急擠”向下壓，而應是“輕踏慢送”以得到大功率。應記?。郝さ玫酱蠊β?，快踏得到高速度。

When the mining loader is operating, operate the working pilot valve until the boom is lowered, and then make the bucket tip fall to the ground, and approach the pile at a slow speed. To make the loader move in a straight line and shovel, if the front and rear wheels are not in a straight line, it will not only reduce the propulsive force, but also damage the shovel due to its "" shape. During shovel loading, the sporadic rocks in the loading area should be cleared first to avoid collision with the bottom of the car and damage to the tires. The shoveling and loading process of the scraper is the process of shoveling ore from the ore pile by using the combined force of the insertion force of the machine walking and the shoveling force of the lifting bucket. In the shovel loading process, instead of "squeezing" the control valve pedal downward, it should be "stepping gently and sending slowly" to get high power. It should be remembered that slow step can get high power, and fast step can get high speed.

礦用裝載機工作系統采用先導液控系統，使操作愈加簡單、。停車制動采用磨擦片彈簧制動，液壓力解除制動，使停車制動平安牢靠。卷纜系統采用液壓操作，收放電纜與車輛行進、后退同步，壓力穩定，裝有電纜過放維護安裝，更好地維護電纜不被拉斷。整機外型美觀、性能優秀、操作靈敏、維護便當，產品各項平安性能指標完整依照國度規范停止設計與制造。

The working system of the mine loader adopts the pilot hydraulic control system, which makes the operation simpler and. The parking brake adopts friction plate spring braking, and the hydraulic pressure relieves the braking, so that the parking brake is safe and reliable. The cable winding system is hydraulically operated. The cable retraction and release are synchronized with the vehicle's travel and retreat, and the pressure is stable. It is equipped with cable over release maintenance and installation, so as to better maintain the cable from being broken. The whole machine has beautiful appearance, excellent performance, sensitive operation and easy maintenance. All safety performance indicators of the product are completely designed and manufactured in accordance with national specifications.
能充沛應用發起機的功率，扭矩使整機具有較大的牽引力同時還能順應外界阻力變化而自動無級變速，在充沛進步發起機運用效率的同時延長傳動機件和發起機的運用壽命。

Mine loader roadway forklift underground loader horizontal smokeless loader small loader small forklift adopts hydraulic mechanical transmission. It can make full use of the power and torque of the starter, so that the whole machine has a large traction force. At the same time, it can also adapt to the changes of external resistance and automatically stepless speed change, which can fully improve the efficiency of the starter and prolong the service life of the transmission parts and the starter at the same time.

以上就是為大家介紹的有關礦用裝載機的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務.http://www.socialsecurityutah.com

The above is a detailed introduction about the mining loader, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.socialsecurityutah.com